
Build Your Own Take-Down Recurve Bow
All-In-One Starter Kit Part #FIRSTTDRC
The All-In-One Take-Down Recurve Kit comes with everything pictured below. To order your All-In-One Kit, please do the following:
- State desired draw weight (25# - 70#).
- State desired draw length (25”- 32”).
- State desired length (58”, 60", 62", 64", 66", or 68”).
- State desired width (1.75” or 2”).
- State whether shooter is right or left handed.
- State desired riser wood (Hard Maple, Ash, Jatoba, Bubinga, Shedua, Padauk, or Ebiara (Red Zebra).
- Choose two colors for tip overlays (Black, White, Red, Tan).
And that’s it! With this information we can assemble your All-In-One Kit and get you started!
Order All-In-One KitIndividual Items in the All-In-One Starter Kit

7300 Take-Down Recurve Limb Lamination Kit
Black Bo-Tuff Glass and Coreflex/Superaction core laminations in natural with wedges to match.

302TDRC Take-Down Recurve Laminating Press Kit
Includes all components necessary to construct the Take-Down Recurve laminating press. Kit does not include plywood used to build mold. State 1.75" or 2".

7800A Limb Locking Kit
Black bezel kit.

4063 Smooth-On Epoxy
1 pint

402P Phenolic Overlays
1x1 / 16x5". Order 2.

2TC Thermostat Control
A fixed 150-180 degree laminating oven heat controller.

403S Solid Riser Blocks
Quality solid blocks of wood available in Hard Maple, Ash, Jatoba, Bubinga, Shedua, Padauk, or Ebiara (Red Zebra).

415F Filament Tape
3/4"
Example

Limb: Bocote