Uni-Weft

$11.75$12.75

Uni-weft Glass is a continuous unidirectional “E” fiberglass laminate with 90 degree fiberglass inlay. This combination not only gives high strength and stiffness along the longitudinal (0) axis, but also provides cross strength and stiffness (90 degrees to the longitudinal axis). It provides increased limb stability where thin or narrow limb design is used, with the addition of a color strip through the limb when red or black is used, as viewed from the edge of the bow. Available in .030″, natural (2″ natural comes in .040″), red (1.5″ red comes in .040″) and black, and sanded on both sides. Quantity discounts will be applied by BPI when the order is shipped. 72″ lengths.

Clear

Color *

Description

Uni-weft is a continuous unidirectional “E” fiberglass laminate with 90 degree fiberglass inlay. This combination not only gives high strength and stiffness along the longitudinal (0) axis, but also provides cross strength and stiffness (90 degrees to the longitudinal axis). It provides increased tortional stability where thin or narrow limb design is used, with the addition of a color strip through the limb when red or black is used, as viewed from the edge of the bow. Available in .030″, natural (2″ natural comes in .040″), red (1.5″ red comes in .040″) and black, and sanded on both sides. Quantity discounts will be applied by BPI when the order is shipped. 72″ lengths.

Additional information

Width

2", 1.75", 1.5"

Customer Questions & Answers

  1. Q does this make the draw weight of your bow go up? answer now
    Asked by jon tonnesen on August 26, 2020 8:02 pm
    Answered by the admin If you allow for the thickness of the uni-weft, it won't change the weight. If you just add it, yes the weight will go up.

Send me a notification for each new answer.