$414.00
The All-In-One Starter Kit For Your First One Piece Recurve includes everything that you need to make your first bow. The limb kit comes with olive green, red or white glass and hard maple laminations. Choose your riser from hard maple, ash, jatoba, or padauk. This kit includes the following: Limb lamination kit with hard maple wood core, press kit with instructions and dvd, thermostat control, riser block, epoxy, phenolic tip overlays (2 pair), continuous loop dacron string (2), 2″ high temperature resistant masking tape and filament tape.
Description
The All-In-One Starter Kit For Your First One Piece Recurve includes everything that you need to make your first bow. The limb kit comes with olive green, red or white glass and hard maple laminations. Choose your riser from hard maple, ash, jatoba, or padauk. This kit includes the following: Limb lamination kit with hard maple wood core, press kit with instructions and dvd, thermostat control, riser block, epoxy, phenolic tip overlays (2 pair), continuous loop dacron string (2), 2″ high temperature resistant masking tape and filament tape.
Additional information
| Glass Color | Olive Green, Red, White |
|---|
Customer Questions & Answers
-
With one piece recurve kit, does it come with a riser template?
-
Q With one piece recurve kit, does it come with a riser template? answer nowAsked by on May 10, 2023 1:08 pmAnswered by the admin Yes, it comes with the regular and alternate riser template.
I’ve seen that your 36” limbs are tapered. Why is that.?
-
Q I’ve seen that your 36” limbs are tapered. Why is that.? answer nowAsked by on December 23, 2022 8:01 pmAnswered by the admin
Most of our designs have a .002" taper in the limb. This moves the bending point of the limb a little bit toward the tip. It makes a very nice bending limb.
Hi. Do you include a fire hose( wich width?) with fittings and valve in your one piece recurve starter kits?
-
Q Hi. Do you include a fire hose( wich width?) with fittings and valve in your one piece recurve st...... Read more answer nowAsked by on October 3, 2022 11:02 amAnswered by the admin
Yes, the hose, plugs and clamps are included in the all-in-one kit. The hose has a 1.5" ID.
Can the Black glass be substituted with Clear glass (with price adjustment)? Thanks
-
Q Can the Black glass be substituted with Clear glass (with price adjustment)? Thanks answer nowAsked by on October 29, 2021 10:00 pmAnswered by the admin Sure. Just leave us a note in the comments section that you would like clear glass instead of black. You can ask us to substitute any color.
I’m left handed, but plan to make multiple bows for friends and family who are right handed. Will the press work for right and left handed shooters?
-
Q I’m left handed, but plan to make multiple bows for friends and family who are right handed. Will...... Read more answer nowAsked by on March 31, 2021 7:18 amAnswered by the admin Our instruction material will work for both right hand and left. For left hand, just flip the template over.
what tools outside the kit do i need to built my first bow?
-
Q what tools outside the kit do i need to built my first bow? answer nowAsked by on January 7, 2021 8:15 pmAnswered by the admin For the 1 piece recurve, the required power tools are a band saw and some kind of drum sanding unit. If you don't have a drum sander but you have a drill press, we have drum sanding units for your drill press. Optional power tools include a table saw and a joiner. These aren't required.
How do you determine what Draw Weight and Draw Length you want?
-
Q How do you determine what Draw Weight and Draw Length you want? answer nowAsked by on November 5, 2020 6:21 pmAnswered by the admin Thanks for your questions. The draw weight should be comfortable for you so that you enjoy shooting. For hunting, an average weight would be 45-50#. For target, 30-35#. You can measure your draw length by nocking an arrow in your bow and drawing back to a comfortable anchor point. At full draw, your draw length is the measurement from the base of the nock groove to where your arrow meets the target side of your riser. That is the draw length. For your arrow length, add 1" to your draw length.
Can the materials be reused to make another bow?
-
Answered by the admin Yes. The press and thermostat can be reused and the masking and filament tape will do multiple bows.
do I have to make my own form and hot box if so is there instructions how to build them
-
Q do I have to make my own form and hot box if so is there instructions how to build them answer nowAsked by on July 9, 2020 1:23 pmAnswered by the admin Yes. Part of the project is making your press (form) and hot box. The All-In-One kit has the hardware and the instructions. The is a step by step booklet, usually two blueprints and a dvd.
When you ask left or right hand does that mean the hand which holds the bow or the pulls the string?
-
Q When you ask left or right hand does that mean the hand which holds the bow or the pulls the string? answer nowAsked by on January 8, 2019 5:28 pmAnswered by the admin
Thanks for your question. Right hand means to pull the bow string with the right hand.
