$14.40 – $30.24
Air Hose
– Excellent glue lines.
– Consistent pressure.
– Repeatable results time after time.
With our designs, we suggest 84″ for longbows, 76″ for 1 piece recurves, 42″ for take-down longbows, and 40″ for take-down recurves.
Description
Specially designed Air Hose. When used with our press system, gives excellent glue lines, consistent pressure, and repeatable results time after time. With our designs, we suggest 84″ for longbows, 76″ for 1 piece recurves, 42″ for take-down longbows, and 40″ for take-down recurves.
Additional information
| Bow Lengths | 84" Longbow, 76" 1 Piece Recurve, 42" Take-Down Longbow, 40" Take-Down Recurve |
|---|
Customer Questions & Answers
-
Does this hose come with air fittings ready to use?
-
Q Does this hose come with air fittings ready to use? answer nowAsked by on December 10, 2022 8:12 amAnswered by the admin
The plugs and clamps are sold separately.
Does the recommended 60 psi starting hose pressure allow for the pressure increase due to the temperature rise in the curing box?
-
Q Does the recommended 60 psi starting hose pressure allow for the pressure increase due to the tem...... Read more answer nowAsked by on June 20, 2022 9:06 pmAnswered by the admin
That is correct.
I forgot how much air pressure in the bow press hose it’s been 10 years since I use it. Thank you.
-
Q I forgot how much air pressure in the bow press hose it’s been 10 years since I use it. Thank you. answer nowAsked by on January 15, 2022 11:33 amAnswered by the admin Your hose should be inflated to 60 psi.
What pressure should be used
-
Answered by the admin We recommend 60 psi.
Can you use the 84 inch hose for one piece recurves or will it it be to long for the recurve mold
-
Q Can you use the 84 inch hose for one piece recurves or will it it be to long for the recurve mold answer nowAsked by on July 30, 2019 12:32 pmAnswered by the admin Excellent question. The hose orientation for the longbow mold is mostly horizontal. The hose orientation for the recurve is vertical at the ends. The longbow hose won't work in the recurve mold because the ends stick up vertically and you won't be able to shut the heat box lid.
What's the diameter of the hose? Will it work with 1 1/4" and 1 1/2" wide limbs?
-
Q What's the diameter of the hose? Will it work with 1 1/4" and 1 1/2" wide limbs? answer nowAsked by on April 16, 2018 6:02 amAnswered by the admin The hose is 1.5" ID and will work with all widths from 1.5" - 2". The 1 1/4" limb that you mention is just the finish width from 1.5" stock.
Will the 42" hose work for both the takedown recurve and the takedown longbow?
-
Q Will the 42" hose work for both the takedown recurve and the takedown longbow? answer nowAsked by on April 9, 2018 5:28 pmAnswered by the admin Yes, the 42" hose will work for the take-down longbow and the take-down recurve.
