
Build Your Own 68" Shallow Take-Down Longbow
All-In-One Starter Kit Part #FIRSTTDLBSH
The All-In-One Take-Down Longbow Kit comes with everything pictured below. To order your All-In-One Kit, please do the following:
- State desired draw weight (25# - 70#).
- State desired draw length (25”- 32”).
- State whether shooter is right or left handed.
- State desired riser wood (Hard Maple, Ash, Jatoba, Bubinga, Shedua, Padauk, or Ebiara (Red Zebra).
- Choose two colors for tip overlays (Black, White, Red, Tan).
And that’s it! With this information we can assemble your All-In-One Kit and get you started! (58"-68" lengths can be made from the same laminating press. If making other than 68" design, after receiving blueprints, call for special instructions.)
Order All-In-One KitIndividual Items in the All-In-One Starter Kit

26150 68" Shallow Take-Down Longbow Limb Lamination Kit
Black Bo-Tuff Glass and Coreflex/Superaction core laminations in natural and wedges to match.

302TDLB Take-Down Longbow Laminating Press Kit
Includes all components necessary to construct the Take-Down Longbow laminating press. Kit does not include plywood used to build mold.

4063 Smooth-On Epoxy
1 pint

402P Phenolic Overlays
1x1 / 16x5". Order 2.

2TC Thermostat Control
A fixed 150-180 degree laminating oven heat controller

403S Solid Riser Blocks
Quality solid blocks of wood available in Hard Maple, Ash, Jatoba, Bubinga, Shedua, Padauk or Ebiara (Red Zebra).

415F Filament Tape
3/4"

7800A Limb Locking Kit
1" Black bezel kit.
Example

Riser: Zebra with black and white phenolic