Build Your Own 68" Pronounced Take-Down Longbow

All-In-One Starter Kit #FIRSTTDLBPR

The All-In-One Take-Down Longbow Kit comes with everything pictured below. To order your All-In-One Kit, please do the following:

1. State desired draw weight (25# - 70#).
2. State desired draw length (25” - 32”).
3. State whether shooter is right or left handed.
4. State desired riser wood (Hard Maple, Ash, Jatoba, Bubinga, Shedua, Padauk, or Ebiara (Red Zebra).
5. Choose two colors for tip overlays (Black, White, Red, Tan).

And that’s it! With this information we can assemble your All-In-One Kit and get you started! (58"-68" lengths can be made from the same laminating press. If making other than 68" design, after receiving blueprints, call for special instructions.)

Individual Items in the All-In-One Starter Kit

36150 68” Pronounced Take-Down Longbow Limb Lamination Kit

Black Bo-Tuff Glass and Coreflex/ Superaction core laminations in natural and wedges to match.

302TDLB Take- Down Longbow Laminating Press Kit

Includes all components necessary to construct the Take-Down Longbow laminating press. Kit does not include plywood used to build mold.

2TC Thermostat Control

A fixed 150-180 degree laminating oven heat controller.

403S Solid Riser Blocks

Quality solid blocks of wood available in Hard Maple, Ash, Jatoba, Bubinga, Shedua, Padauk, or Ebiara (Red Zebra).

7800A Limb Locking Kit

1" Black bezel kit.

4063 Smooth-On Epoxy

1 pint

402P Phenolic Overlays

1x1 / 16x5". Order 2.

7900 Drilling Jig

7950 Bottom Tap

1707 Continuous Loop Dacron Bow String

Order 2.

1827 Calf Hair Traditional Rest

415M Termperature-Resistant Masking Tape

1 1/2"

415F Filament Tape

3/4"

Example

Limbs: Curly Maple

Wedges: Zebra

Riser: Zebra with black and white phenolic